HP Chassis, Networking / Infrastructure

Backing up a HP Chassis

It is always best practice to take a backup of a chassis before making any changes especially a firmware update.

First of all access your desired chassis then go to;

Enclosure Settings > Enclosure Bay IP Addressing > Configuration Scripts

hp

On the right hand side you will see;

SHOW CONFIG: Click to view a configuration script containing the current settings for this enclosure.

hp1

SHOW ALL: Click to view a script containing a list of the enclosure’s current inventory.

hp2

You can save the configuration files using notepad to somewhere safe. So these two files are used for the recovery if something goes wrong.

So when you need a recovery go to

Enclosure Settings > Enclosure Bay IP Addressing > Configuration Scripts again. On the left hand side;

hp3

 

You need to browse to locate those backup configuration files you have saved and upload them. It might take a while and after completion make sure everything is as expected.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s